Changes

Trutzbox Manual

17,462 bytes added, 6 years ago

→‎TrutzBox® Setup (for TrutzBox® Administrator)

Continue to "Part III: Completion of the setup".

==== Part IIb: Setup with Non-Firefox ====

The main difference to "Setup with Firefox" is that with non-Firefox the root certificate

* is downloaded into the download directory of the PC and

* is imported from the download directory into the certificate management of the PC..

Then, the root certificate is automatically available to both Internet Explorer and Google Chrome.

[[File:20151015-Ersteinrichtung-0510.png|700px|link=]]

Then connect your computer's browser to the TrutzBox® by entering"<nowiki>http://trutzbox</nowiki>" in the browser's address bar (1).

[[#top|-> Table of Contents (of this manual)]]

[[File:20151015-Ersteinrichtung-0520.png|700px|link=]]

The TrutzBox® checks the internet connection (1) ...

[[#top|-> Table of Contents (of this manual)]]

[[File:20151015-Ersteinrichtung-0530.png|700px|link=]]

... and confirms the connection with a green checkmark (1).

Click on "Weiter" (2).

[[#top|-> Table of Contents (of this manual)]]

[[File:20151015-Ersteinrichtung-0540.png|700px|link=]]

Here you can read the license conditions.

If you agree, click on "Accept license terms" (1).

[[#top|-> Table of Contents (of this manual)]]

[[File:20151015-Ersteinrichtung-0551.png|700px|link=]]

Since you are currently using Chrome (i.e. non-Firefox), click on "here" in step 1 (b) (1).

This downloaded the root certificate under the name "trutzbox.cer" into the download area.

Open a second tab window (2) to import the root certificate.

[[#top|-> Table of Contents (of this manual)]]

[[File:20151015-Ersteinrichtung-0560.png|700px|link=]]

Open "Customize and configure Google Chrome" (1) and click on " Settings " (2).

[[#top|-> Table of Contents (of this manual)]]

[[File:20151015-Ersteinrichtung-0570.png|700px|link=]]

Scroll all the way down (1) and click on "Show advanced settings" (2).

[[#top|-> Table of Contents (of this manual)]]

[[File:20151015-Ersteinrichtung-0580.png|700px|link=]]

Scroll down (1) and click on "Manage Certificates" (2) and then on "Trusted Root Certification Authorities" (3).

[[#top|-> Table of Contents (of this manual)]]

[[File:20151015-Ersteinrichtung-0590.png|400px|link=]]

Click on "Import" (1).

[[#top|-> Table of Contents (of this manual)]]

[[File:20151015-Ersteinrichtung-0600.png|400px|link=]]

Click on " Weiter " (1).

[[#top|-> Table of Contents (of this manual)]]

[[File:20151015-Ersteinrichtung-0610.png|400px|link=]]

Click on " Durchsuchen " (1).

[[#top|-> Table of Contents (of this manual)]]

[[File:20151015-Ersteinrichtung-0620.png|700px|link=]]

Click on "trutzbox.cer" (1) and then on "Open" (2).

[[#top|-> Table of Contents (of this manual)]]

[[File:20151015-Ersteinrichtung-0630.png|500px|link=]]

Click on " Weiter " (1).

[[#top|-> Table of Contents (of this manual)]]

[[File:20151015-Ersteinrichtung-0640.png|500px|link=]]

Check that "Trusted Root Certification Authorities" is checked (1) and click "Next" (2).

[[#top|-> Table of Contents (of this manual)]]

[[File:20151015-Ersteinrichtung-0650.png|500px|link=]]

Click on " Fertigstellen " (1).

[[#top|-> Table of Contents (of this manual)]]

[[File:20151015-Ersteinrichtung-0660.png|500px|link=]]

Click on " Ja " (1).

[[#top|-> Table of Contents (of this manual)]]

[[File:20151015-Ersteinrichtung-0670.png|300px|link=]]

Click on " OK " (1).

[[#top|-> Table of Contents (of this manual)]]

[[File:20151015-Ersteinrichtung-0680.png|500px|link=]]

The TrutzBox root certificate (1) appears in the list; click on "Close" (2).

[[#top|-> Table of Contents (of this manual)]]

[[File:20151015-Ersteinrichtung-0690.png|700px|link=]]

To continue the TrutzBox setup, switch back to the first tab window (1).

[[#top|-> Table of Contents (of this manual)]]

[[File:20151015-Ersteinrichtung-0710.png|700px|link=]]

Click on " Test starten " (1). ...

[[#top|-> Table of Contents (of this manual)]]

[[File:20151015-Ersteinrichtung-0720.png|700px|link=]]

... and wait for the test result (1).

Click on " Weiter " (2).

[[#top|-> Table of Contents (of this manual)]]

==== Part III: Completion of the setup ====

[[File:20151015-Ersteinrichtung-0221.png|700px|link=]]

Determine, enter (1) and repeat administrator password (2).

All characters according to ASCII table https://en.wikipedia.org/wiki/ASCII#ASCII_printable_code_chart are allowed.

This password is required to open the TrutzBox® user interface as administrator..

Click on " Weiter " (3).

[[#top|-> Table of Contents (of this manual)]]

[[File:20151015-Ersteinrichtung-0231.png|700px|link=]]

Take the data from the TrutzLegitimierung (coloured paper) and enter the TrutzKennung (1) and TrutzSchlüssel (2).

Click on " Weiter " (3).

[[#top|-> Table of Contents (of this manual)]]

[[File:20151015-Ersteinrichtung-0241.png|700px|link=]]

Self-chose and enter TrutzMail details:

* Name (1),

* TrutzMail address (2): please enter only the name of the user, "@comidio.email" will be added automatically.

* Set, enter (3) and repeat (4) the TrutzMail password. All characters according to ASCII table https://en.wikipedia.org/wiki/ASCII#ASCII_printable_code_chart are allowed.

These are your TrutzMail account data, which you need to use your webmail or to configure your e-mail program.

Click on " Weiter " (5).

[[#top|-> Table of Contents (of this manual)]]

[[File:20151015-Ersteinrichtung-0251.png|700px|link=]]

Enter a WLAN name of your choice [SSID = Service Set IDentifier = Name of wireless network)] (1) and WLAN password (2).

All characters according to ASCII table https://en.wikipedia.org/wiki/ASCII#ASCII_printable_code_chart are allowed.

Note: choose a pseudonym as name (SSID), no clear name, as the wireless network connection name is visible with a range of up to approx. 50 m.

With this TrutzBox® SSID you connect the WLAN devices of the home network.

Click on " Weiter " (4).

[[#top|-> Table of Contents (of this manual)]]

[[File:20151015-Ersteinrichtung-0255.png|700px|link=]]

If the check mark remains set (1), about half a gigabyte of memory space is freed up.

Click on " Weiter " (2).

[[#top|-> Table of Contents (of this manual)]]

[[File:20151015-Ersteinrichtung-0261.png|700px|link=]]

Check your details; for corrections click on „Zurück“.

Then click on „Ersteinrichtung starten“.

Please note that this process can take several minutes.

[[#top|-> Table of Contents (of this manual)]]

[[File:20151015-Ersteinrichtung-0270.png|700px|link=]]

The TrutzBox® checks if there are current updates; if yes, they will be downloaded now (1).

Please note that this process can take '''up to 30 minutes'''.

[[#top|-> Table of Contents (of this manual)]]

[[File:20151015-Ersteinrichtung-0281.png|700px|link=]]

The updates are completely downloaded when the window " Abschluss der Einrichtung " appears.

Click directly - without clicking on steps 1 & 2 - on the "Fertig" button to end the setup process.

(Step 1 follows only after the installation; Step 2 can now be saved due to the further development of the TrutzBox).

[[#top|-> Table of Contents (of this manual)]]

[[File:20151015-Ersteinrichtung-0284.png|700px|link=]]

Then the TrutzBox user interface appears automatically and shows you:

'''Now the quick start is complete.'''

[[#top|-> Table of Contents (of this manual)]]

'''After downloading, your TrutzBox® is ready for operation.'''

----

The next step is to

* set up the TrutzBox as a proxy; see Chapter entitled "Connecting the device to the TrutzBox" and

* import the root certificate (if you want to use other devices with a browser in addition to your PC); see the "Certificates" chapter.

On every other device with a browser that uses the TrutzBox®, the certificate

* if browser is Firefox: must be imported into the Firefox certificate management,

* if browser is not Firefox: must be imported into the certificate management of the other browser, and thus automatically into the certificate management of the operating system. (see chapter "Certificates").

To use TrutzMail or TrutzChat, the TrutzBox certificate must also have been imported into the certificate management of the operating system.

The TrutzBox certificate only needs to be imported once into the certificate management of the operating system and is then available there for

*all non-Firefox browsers and

*TrutzMail and

*TrutzChat.

If you do not import the certificate into the browsers and notify the mail system, you will be prompted for security confirmation each time you open it.

Therefore it is recommended to download the TrutzBox® certificate from the TrutzBox® to the device with browser and import it into the browser afterwards.

[[#top|-> Table of Contents (of this manual)]]

==== Disable IPv6 ====

The TrutzBox works exclusively with IPv4 addresses.

If your TrutzBox is not connected to the router or your terminal device (e.g. PC) cannot reach the TrutzBox, one reason for this may be that the router assigns IPv6 addresses. To avoid this, it should be ensured that the router assigns IPv4 addresses.

To disable IPv6 addresses, proceed as follows:

[[File:325 IPv6 Unterstützung deaktivieren 021.png|700px|link=]]

In the FRITZ!box user interface, call up Internet.

[[#top|-> Table of Contents (of this manual)]]

[[File:325 IPv6 Unterstützung deaktivieren 031.png|700px|link=]]

Click on " Zugangsdaten " (2).

[[#top|-> Table of Contents (of this manual)]]

[[File:325 IPv6 Unterstützung deaktivieren 041.png|700px|link=]]

Click on " IPv6" (1).

The box under "IPv6 support" should not be checked (2).

[[#top|-> Table of Contents (of this manual)]]

[[File:325 IPv6 Unterstützung deaktivieren 051.png|700px|link=]]

If a check mark is set, deactivate this option.

[[#top|-> Table of Contents (of this manual)]]

=== WLAN Installation Guide===

==== Replacement installation of WLAN-Plus (e.g. after WLAN basic)====

If you have already used another WLAN hardware (e.g. WLAN-Basic EDIMAX stick) with the TrutzBox, please proceed according to the following "WLAN Installation Info" BEFORE installing the built-in antenna.

Call Webmin

* via TrutzBox user interface: System -> Advanced settings, or

* via call: https://trutzbox:10000.

[[File:3_3_1 Ersatz-Einbau 020.png|700px|link=]]

In Webmin:

*System (1)

*-> Kommandozeile (2)

* enter there in the field to the right „Führe Befehl aus:“ (3): rm /etc/udev/rules.d/70-persistent-net.rules

* and click on "Führe Befehl aus" (4).

[[#top|-> Table of Contents (of this manual)]]

[[File:3_3_1 Ersatz-Einbau 030.png|700px|link=]]

Shutdown TrutzBox

*using Webmin: System (1)

*-> System-Start und –Stop (2),

* scroll down (3) and

* click on „System herunterfahren“ (4).

When LEDs are off, remove TrutzBox from the power supply, open the housing and install the built-in antenna (see the following WLAN installation instructions).

[[#top|-> Table of Contents (of this manual)]]

==== First installation of WLAN-Plus ====

* Attention, the WLAN card can be damaged by electrical (discharge) charging. Before opening the WLAN card bag and touching the WLAN card, be sure to touch an earthed metal part (e.g. radiator) or at least the TrutzBox housing with both hands (to drain off possible charging).

[[File:20160911 WLAN Einbau 110.png|700px|link=]]

* Check scope of delivery: WLAN card (1), two antenna cables (2) and two antennas (3).

* If necessary, shut down the TrutzBox and disconnect all cable connections, including the power supply.

* Open the TrutzBox by loosening the 4 screws and remove the housing cover. (4).

* Check that the cables of the supplied WLAN card are still firmly plugged onto the WLAN card (5).

[[#top|-> Table of Contents (of this manual)]]

[[File:20160911 WLAN Einbau 120.png|700px|link=]]

* Carefully insert the card at an angle into the middle terminal strip (6) seen from behind and carefully press the card downwards until it clicks into place on both sides (7).

* Remove the two rubber caps inserted into the back of the TrutzBox (8).

[[#top|-> Table of Contents (of this manual)]]

[[File:20160911 WLAN Einbau 130.png|700px|link=]]

* Insert the two antenna cables into the two outer cut-out holes on the TrutzBox rear side (from the inside) (9) - Attention: the thread and hole are flattened at the top - and (from the outside) screw on (10) with washer and nut (8 mm wrench).

[[#top|-> Table of Contents (of this manual)]]

[[File:20160911 WLAN Einbau 140.png|700px|link=]]

* Screw on the two antennas (11).

* In the left position (seen from behind) the SSD is located (12).

* Replace the housing cover on the TrutzBox and tighten it with the 4 screws..

* Connect TrutzBox to router and power supply - so that it boots ( wait approx. 10 minutes).

If a WLAN has not already been set up in the TrutzBox interface, set the SSID (name of the TrutzBox WLAN network) and the access password in the TrutzBox interface under Network -> WLAN.

[[#top|-> Table of Contents (of this manual)]]

===SSD Installation Guide===

* Attention, the WLAN card can be damaged by electrical (discharge) charging. Before opening the WLAN card bag and touching the WLAN card, be sure to touch an earthed metal part (e.g. radiator) or at least the TrutzBox housing with both hands (to drain off possible charging).

* Shut down the TrutzBox and disconnect all cables, including the power supply.

[[File:SSD EinbauAustauschAnleitung 010.png|700px|link=]]

Loosen the 4 screws (1) and remove the housing cover (2).

[[#top|-> Table of Contents (of this manual)]]

[[File:SSD EinbauAustauschAnleitung 020.png|700px|link=]]

As necessary, remove the SD card (3) or the SSD card/plate (4).

[[#top|-> Table of Contents (of this manual)]]

[[File:SSD EinbauAustauschAnleitung 030.png|700px|link=]]

'''Remove SD card:''' Grab SD card (5) …

[[#top|-> Table of Contents (of this manual)]]

[[File:SSD EinbauAustauschAnleitung 040.png|700px|link=]]

… and carefully pull out the SD card (6).

[[#top|-> Table of Contents (of this manual)]]

[[File:SSD EinbauAustauschAnleitung 050.png|700px|link=]]

'''Remove the SSD card: ''' Carefully push both locking springs (7) and (8) backwards, towards the back of the housing …

[[#top|-> Table of Contents (of this manual)]]

[[File:SSD EinbauAustauschAnleitung 060.png|700px|link=]]

… and carefully lift the detached SSD card upwards (9).

[[#top|-> Table of Contents (of this manual)]]

[[File:SSD EinbauAustauschAnleitung 070.png|700px|link=]]

Carefully pull out the '''old SSD card''' (10) at an angle upwards..

[[#top|-> Table of Contents (of this manual)]]

[[File:SSD EinbauAustauschAnleitung 080.png|700px|link=]]

Carefully insert the '''new SSD card''' (11) at an angle to the bottom....

[[#top|-> Table of Contents (of this manual)]]

[[File:SSD EinbauAustauschAnleitung 090.png|700px|link=]]

... and insert the SSD card (12) into the holder with gentle pressure.

[[#top|-> Table of Contents (of this manual)]]

[[File:SSD EinbauAustauschAnleitung 100.png|700px|link=]]

Press SSD card on "free side" with feeling down (13)...

[[#top|-> Table of Contents (of this manual)]]

[[File:SSD EinbauAustauschAnleitung 110.png|700px|link=]]

... until SSD card audibly engages in both retaining springs (14).

[[#top|-> Table of Contents (of this manual)]]

[[File:SSD EinbauAustauschAnleitung 120.png|700px|link=]]

Slide the housing back on (15) and screw in the 4 screws again (16).

'''Good luck with your new SSD!'''

[[#top|-> Table of Contents (of this manual)]]

Fox

Bureaucrats, Administrators

5,561

edits

Comidio β

Changes

Trutzbox Manual

Comidio ^β